DP126 = Acrylic Draw Plate 22 Holes

This Draw Plate is laser cut from acrylic and specially designed to minimize marring wire as you draw it down. Start with a length of knitted or braided Wire rope, then draw it through successively smaller holes until it is the size you need.

Each hole is slightly tapered to make a smoother and more even draw. For best results, draw from the front of the draw plate (numbered side) to the back.

The plate has two sets of holes, one marked with millimeters from 16 mm to 3 mm and the other inches and 5/8 in to 1/8 in. 22 holes total.