12-0451 = Vigor 5-Minute Jeweler’s Two-Part Epoxy – 1 fl oz Total

A clear, two-part epoxy intended for jewelry making and jewelry repair. Mix equal portions of the resin and hardener to create a strong bond for suitable jewelry components.

The mixed epoxy begins setting in approximately five minutes. Full curing takes longer, so allow the repaired or assembled piece to cure completely according to the package directions before wearing, handling, or placing the bond under stress.

Directions:
• Begin with clean, dry, properly fitted surfaces.
• Mix equal amounts of Part A and Part B until thoroughly combined.
• Apply a small amount to the bonding surfaces and assemble promptly.
• Allow the epoxy to cure completely before use.

Mix only what you can use promptly.  Five-minute epoxy is not especially patient while you answer the phone.

Product details:
• Two-part resin and hardener
• Approximately five-minute set time
• Clear appearance when cured
• Net contents: 1 fl oz total
• Intended for jewelry making and repair

Safety information:
Use in a well-ventilated area. Avoid breathing vapors and avoid contact with skin and eyes. Wear suitable protective gloves and eye protection while mixing and applying. Keep the containers closed when not in use. Keep out of reach of children. Do not pour unused material down a drain. Read and follow all package directions and safety information before use.