{"title":"Knew Concepts","description":null,"products":[{"product_id":"bp1000","title":"BP1000 = Stainless Steel Bench Pin","description":"\u003cp\u003eSolid Stainless Steel Bench Pin for Piercing.\u003cbr\u003eMade of 3\/16\" solid stainless steel, it will not bounce or shimmy as you cut, yet is thin enough not to interfere with your stroke.\u003cbr\u003e\u003cbr\u003eThe pin is designed to fit onto a standard dovetail mount, or onto one of our \"clamp anywhere\" BP1001 dovetail mounted clamps, so you can take them anywhere you like.\u003cbr\u003e\u003cbr\u003eWill also slide easily onto your G04557 GRS mounting plate.\u003cbr\u003e\u003cbr\u003eDesigned from the beginning with the bench jeweler in mind, the pin has a series of extra \"goodies\" built in. On the front, there is an adjustable delrin ring hook, specifically set up to make cutting rings for sizing a breeze. It can be either right or left handed, and adjusted to any angle you find comfortable.\u003cbr\u003e\u003cbr\u003eThe pin is solid stainless steel, rather than aluminum, so there is no risk of contaminating your sweeps or files with aluminum. It comes with a brass guide fence, to give you a reference for angles in 15 degree increments from 0 to 60 degrees. Very handy for trimming ring stock for sizing, or filing against the side of the pin to get angles nailed.\u003cbr\u003e\u003cbr\u003eAlso comes with a set of vertical pins that can be screwed through two of the holes in the plate, to serve as a guide for a #30 handpiece in drilling perfectly perpendicular holes, quickly.\u003cbr\u003e\u003cbr\u003eIt will help hold your flex shaft handpiece square to the face of the pin. What you do with it from there is limited only by your imagination .\u003c\/p\u003e","brand":"KNEW CONCEPTS","offers":[{"title":"Default Title","offer_id":51103718572317,"sku":"BP1000","price":95.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/1044\/0733\/files\/bp1000-l.jpg?v=1774904920"},{"product_id":"bp1001","title":"BP1001 = Bench Clamp with Magnet by Knew Concepts","description":"\u003cp\u003eBench Clamp for Dovetail and Benchmate Clamping System with Magnet\u003cbr\u003e\u003cbr\u003eWhat It Does: The Bench Clamp allows you to mount a standard jeweler's dovetail plate anywhere you need it. It adjusts to tables from a thin 3\/4\" plywood card table at a show, all the way up to a 3.7\" woodworker's bench at a workshop. (Or the long side of a 2x4, if you have to.)\u003cbr\u003e\u003cbr\u003eNow your good gear can go anywhere you need it, and hang on tight, just the way you like it. \u003cbr\u003e\u003cbr\u003eWhy You Need It: The Bench Clamp will open up your dovetail accessories (such as the bp1000 Knew Concepts Bench Pin or GRS Benchmate Products) to new spots in the studio, and let you take them with you to entirely new places, like shows and workshops-or the beach.\u003c\/p\u003e\n\u003cp\u003eDo you work at home? No reason why you shouldn't be able to use dovetail accessories, just because you can't drill holes in your table. That's what this clamp is for. Do you need to use your dovetail gear somewhere else in the studio every so often? That's what this clamp is for. Feel like working out on the patio because it's a beautiful day? That's what this clamp is for.\u003cbr\u003e\u003cbr\u003eWhen you're on the road, trying to clamp something to a table at a show, ever notice that there is always some sort of table edge rail in the exact wrong spot? So did we.\u003cbr\u003e\u003cbr\u003eIn addition to being able to clamp tables from 3\/4\" to 3.7\" thick (19€“94mm) there are several different places that the clamp screw can go through, so that at least one of them should be in the clear. There is also a high strength magnet mounted on the top of the clamp to hold small metal items in place such as files, drills, burs, etc. Now these items won't roll away when you need them close.\u003cbr\u003e\u003cbr\u003eThere's even an inch\/metric ruler imprinted on the top for quick measurements!\u003cbr\u003e\u003cbr\u003eWhat It Is: The clamp itself is two pieces of aircraft grade aluminum, with a standard dovetail plate, and a clamping screw. The two pieces come apart, and can be screwed back together at various offsets to allow the clamping screw to reach whatever size table is required. The upper plate is Milspec class 3 hard anodized, so that it won't contaminate your files with aluminum if you slip and file it.\u003cbr\u003e\u003cbr\u003eIt is not hard enough to use as an anvil, but it is as hard as aluminum gets, which is enough to resist accidental file cuts.\u003c\/p\u003e","brand":"KNEW CONCEPTS","offers":[{"title":"Default Title","offer_id":51103718637853,"sku":"BP1001","price":115.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/1044\/0733\/files\/bp1001.jpg?v=1784420510"},{"product_id":"bp1003","title":"BP1003 = Bench Clamp with Anvil Top by Knew Concepts","description":"\u003cp\u003eKnew Concepts Bench Clamp with Anvil Top\u003cbr\u003e\u003cbr\u003eBench Clamp for Dovetail and Benchmate Clamping System\u003cbr\u003e\u003cbr\u003eWhat It Does:The Bench Clamp allows you to mount a standard jeweler's dovetail plate anywhere you need it. It adjusts to tables from a thin 3\/4\" plywood card table at a show, all the way up to a 3.7\" woodworker's bench at a workshop. (Or the long side of a 2x4, if you have to.)\u003cbr\u003e\u003cbr\u003eNow your good gear can go anywhere you need it, and hang on tight, just the way you like it. \u003cbr\u003e\u003cbr\u003eA Little Extra: Since the hard aluminum is not hard enough to pound on, we have the Anvil version of the clamp that has a 2\" hardened steel disk that you can pound on\u003cbr\u003e\u003cbr\u003eWhy You Need It: The Bench Clamp will open up your dovetail accessories (such as theBP1000 Knew Concepts Bench Pin or GRS Benchmates and GRS Benchmate Products) to new spots in the studio, and let you take them with you to entirely new places, like shows and workshops-or the beach.\u003cbr\u003e\u003cbr\u003eDo you work at home? No reason why you shouldn't be able to use dovetail accessories, just because you can't drill holes in your table. That's what this clamp is for. Do you need to use your dovetail gear somewhere else in the studio every so often? That's what this clamp is for. Feel like working out on the patio because it's a beautiful day? That's what this clamp is for.\u003cbr\u003e\u003cbr\u003eWhen you're on the road, trying to clamp something to a table at a show, ever notice that there is always some sort of table edge rail in the exact wrong spot? So did we. In addition to being able to clamp tables from 3\/4\" to 3.7\" thick (19€“94mm) there are several different places that the clamp screw can go through, so that at least one of them should be in the clear.\u003cbr\u003e\u003cbr\u003eWhat It Is: The clamp itself is two pieces of aircraft grade aluminum, with a standard dovetail plate, and a clamping screw. The two pieces come apart, and can be screwed back together at various offsets to allow the clamping screw to reach whatever size table is required. The upper plate is Milspec class 3 hard anodized, so that it won't contaminate your files with aluminum if you slip and file it. It is not hard enough to use as an anvil, but it is as hard as aluminum gets, which is enough to resist accidental file cuts.\u003c\/p\u003e","brand":"KNEW CONCEPTS","offers":[{"title":"Default Title","offer_id":51103718670621,"sku":"BP1003","price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/1044\/0733\/files\/bp1003-l.jpg?v=1774904922"},{"product_id":"sw4033","title":"SW4033 = Knew Concepts 3'' Saw with Screw Tension MK3","description":"\u003cp\u003eThe new and improved Mk.V 5\" fret saw. Now stronger, with improved blade clamps. The new clamps have witness holes, so you can see the back of the blade to make sure you've really grabbed it. The extra length in the clamps also gives the clamps more to hold on to, for improved grip. The new witness hole lets sawdust drop out of the bottom of the clamps, to keep them grabbing solidly. The frames now have the same triangulated truss design that makes the Mk. IV saws so much stronger. A major improvement over the older MK. III design.\u003cbr\u003e\u003cbr\u003eThe screw tension saw was the origin of the Knew Concepts Fret saw line. It is the economy model. It provides extremely precise blade tensioning simply by turning the knurled tension nut at the top of the frame.\u003cbr\u003e\u003cbr\u003e* Weighs only 4.5 oz (128.5 gm)\u003cbr\u003e* Anodized aircraft grade aluminum\u003cbr\u003e* Made in the USA\u003c\/p\u003e","brand":"KNEW CONCEPTS","offers":[{"title":"Default Title","offer_id":51106783428893,"sku":"SW4033","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/1044\/0733\/files\/sw4033_L1.jpg?v=1780411657"},{"product_id":"sw4033cs","title":"SW4033CS = Knew Concepts 3'' Saw with Cam Lever \u0026 Swivel Blade Clamps MK3","description":"\u003cp\u003eThe new and improved Mk.V 5\" fret saw. Now stronger, with improved blade clamps. The new clamps have witness holes, so you can see the back of the blade to make sure you've really grabbed it. The extra length in the clamps also gives the clamps more to hold on to, for improved grip. The new witness hole lets sawdust drop out of the bottom of the clamps, to keep them grabbing solidly. The frames now have the same triangulated truss design that makes the Mk. IV saws so much stronger. A major improvement over the older MK. III design.\u003cbr\u003e\u003cbr\u003eThe swiveling blade clamps allow you to swing the rear of the frame out of the way. The ability to set the frame into a \"neutral corner\" frees you to saw into areas that were never possible before. It swivels45° degrees either to the Right or the Left, and has a lock at the “straight ahead” position. Truly the ultimate in saws.\u003cbr\u003e\u003cbr\u003e* Weighs only 5.3 oz (151 gm)\u003cbr\u003e* Anodized aircraft grade aluminum\u003cbr\u003e* Made in the USA\u003c\/p\u003e","brand":"KNEW CONCEPTS","offers":[{"title":"Default Title","offer_id":51106783592733,"sku":"SW4033CS","price":114.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/1044\/0733\/files\/sw4033cs_L1.jpg?v=1780411696"},{"product_id":"sw4035","title":"SW4035 = Knew Concepts 5'' Saw with Screw Tension MK3","description":"\u003cp\u003eThe new and improved Mk.V 5\" fret saw. Now stronger, with improved blade clamps. The new clamps have witness holes, so you can see the back of the blade to make sure you've really grabbed it. The extra length in the clamps also gives the clamps more to hold on to, for improved grip. The new witness hole lets sawdust drop out of the bottom of the clamps, to keep them grabbing solidly. The frames now have the same triangulated truss design that makes the Mk. IV saws so much stronger. A major improvement over the older MK. III design.\u003cbr\u003e\u003cbr\u003eThe screw tension saw was the origin of the Knew Concepts Fret saw line. It is the economy model. It provides extremely precise blade tensioning simply by turning the knurled tension nut at the top of the frame.\u003cbr\u003e\u003cbr\u003e* Weighs only 5.0 oz (144 gm)\u003cbr\u003e* Anodized aircraft grade aluminum\u003cbr\u003e* Made in the USA\u003c\/p\u003e","brand":"KNEW CONCEPTS","offers":[{"title":"Default Title","offer_id":51106783625501,"sku":"SW4035","price":89.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/1044\/0733\/files\/sw4035_L1.jpg?v=1780411719"},{"product_id":"sw4035c","title":"SW4035C = Knew Concepts 5'' Saw with Cam Lever Tension MK3","description":"\u003cp\u003eThe new and improved Mk.V 5\" fret saw. Now stronger, with improved blade clamps. The new clamps have witness holes, so you can see the back of the blade to make sure you've really grabbed it. The extra length in the clamps also gives the clamps more to hold on to, for improved grip. The new witness hole lets sawdust drop out of the bottom of the clamps, to keep them grabbing solidly. The frames now have the same triangulated truss design that makes the Mk. IV saws so much stronger. A major improvement over the older MK. III design.\u003cbr\u003e\u003cbr\u003eThe swiveling blade clamps allow you to swing the rear of the frame out of the way. The ability to set the frame into a \"neutral corner\" frees you to saw into areas that were never possible before. It swivels45° degrees either to the Right or the Left, and has a lock at the “straight ahead” position. Truly the ultimate in saws.\u003cbr\u003e\u003cbr\u003e* Weighs only 6.1 oz (172 gm)\u003cbr\u003e* Anodized aircraft grade aluminum\u003cbr\u003e* Made in the USA\u003c\/p\u003e","brand":"KNEW CONCEPTS","offers":[{"title":"Default Title","offer_id":51106783658269,"sku":"SW4035C","price":99.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/1044\/0733\/files\/sw4035c_L1.jpg?v=1780411734"},{"product_id":"sw4065","title":"SW4065 = Knew Concepts Mk IV 5'' Saw with Tension Lever","description":"\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"75%\"\u003e\n\u003cspan style=\"font-family: arial; font-size: small;\"\u003e\u003cspan style=\"font-family: arial; font-size: small;\"\u003e \u003cstrong\u003eKNEW CONCEPTS 5\" MARK IV HEAVY DUTY HAND SAWS with CAM LEVER TENSION\u003c\/strong\u003e\u003cbr\u003e Knew Concepts saw frames were designed to address the needs of the hand-sawing jeweler and craftpersons.\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003eReduce sawblade breakage\u003c\/li\u003e\n\u003cli\u003eReduce fatigue\u003c\/li\u003e\n\u003cli\u003eIncrease efficiency\u003c\/li\u003e\n\u003cli\u003eBetter techniques\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"2\" valign=\"top\" width=\"100%\"\u003e\n\u003cspan style=\"font-family: arial; font-size: small;\"\u003e\u003cspan style=\"font-family: arial; font-size: small;\"\u003e \u003cstrong\u003eSo, What  do these New Mark IV Saw Frames Offer?\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e \u003cem\u003e\u003cu\u003eThe Frame\u003c\/u\u003e\u003c\/em\u003e\u003cbr\u003e Saw frame flex is a big culprit in breaking sawblades. The Mark IV frames are designed to pull 50€“60 pounds of tension on their blades, which makes them much stronger and the blades vibrate less than than the Mark 3 saws. They are are also thicker and slightly heavier, closer to the weight of a traditional saw, but still lighter. The saw is powder-coated red, with a laser engraved logo and is extremely scratch and damage resistant.  That rigidity also translates into better control over your sawblade.\u003cbr\u003e\u003cbr\u003e \u003cem\u003e\u003cu\u003eColor\u003c\/u\u003e\u003c\/em\u003e\u003cbr\u003e Red saw frame. Why red? A recent study published in \u003cem\u003eScience\u003c\/em\u003e magazine suggests color has an effect on cognitive tasks. Data indicates the color red promotes better accuracy when performing tasks. Sawing is definitely an area you want accuracy. \u003cbr\u003e\u003cbr\u003e \u003cem\u003e\u003cu\u003eEfficiency with the Cam Lever Tension\u003c\/u\u003e\u003c\/em\u003e\u003cbr\u003e The saw frame is not adjustable. It is designed for use with standard length jewelers' sawblades. This eliminates and adjusting or \"fiddling\" with loose frames when you are trying to fit a blade. This saw frame features the amazing Cam Lever. The Cam Lever allows for the quick tensioning of sawblades. You just insert a sawblade and tighten, then use the Tension Screw to \"pre-tension\" the blade. Then by flipping the Cam Lever over 180deg., the blade gets a locked into its final tension position. Now anytime you need to replace an blade, just release the Cam Lever, change the blade and reset the Cam Lever. You are ready to go. No need to readjust the tension. Saves you tons of time and aggravation. \u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eSAW FRAME FEATURES:\u003c\/strong\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e5\" cutting depth\u003c\/li\u003e\n\u003cli\u003eOverall frame dimensions: 14-1\/2\" x 7-1\/8\"\u003c\/li\u003e\n\u003cli\u003eHeat treated, light weight, rigid aluminum frame\u003c\/li\u003e\n\u003cli\u003eSignature Knew Concepts red color\u003c\/li\u003e\n\u003cli\u003eCam Lever for Super Fast Tensioning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"KNEW CONCEPTS","offers":[{"title":"Default Title","offer_id":51106783723805,"sku":"SW4065","price":115.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/1044\/0733\/files\/sw4065-l.jpg?v=1774987170"},{"product_id":"sw4073","title":"SW4073 = Knew Concepts Mk IV 3'' Saw with Tension Lever \u0026 Swivel","description":"\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"\" width=\"\"\u003e\n\u003cstrong\u003eKNEW CONCEPTS 3\" MARK IV HEAVY DUTY HAND SAWS with CAM LEVER TENSION and SWIVEL BLADE CLAMPS\u003c\/strong\u003e\u003cbr\u003e Knew Concepts saw frames were designed to address the needs of the hand-sawing jeweler and craftpersons.\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eReduce sawblade breakage\u003c\/li\u003e\n\u003cli\u003eReduce fatigue\u003c\/li\u003e\n\u003cli\u003eIncrease efficiency\u003c\/li\u003e\n\u003cli\u003eBetter techniques\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd colspan=\"\" valign=\"\" width=\"\"\u003e\n\u003cstrong\u003eSo, What  do these New Mark IV Saw Frames Offer?\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e \u003cem\u003e\u003cu\u003eThe Frame\u003c\/u\u003e\u003c\/em\u003e\u003cbr\u003e Saw frame flex is a big culprit in breaking sawblades. The Mark IV frames are designed to pull 50‚¬Å“60 pounds of tension on their blades, which makes them much stronger and the blades vibrate less than than the Mark 3 saws. They are are also thicker and slightly heavier, closer to the weight of a traditional saw, but still lighter. The saw is powder-coated red, with a laser engraved logo and is extremely scratch and damage resistant.  That rigidity also translates into better control over your sawblade.\u003cbr\u003e\u003cbr\u003e \u003cem\u003e\u003cu\u003eColor\u003c\/u\u003e\u003c\/em\u003e\u003cbr\u003e Red saw frame. Why red? A recent study published in \u003cem\u003eScience\u003c\/em\u003e magazine suggests color has an effect on cognitive tasks. Data indicates the color red promotes better accuracy when performing tasks. Sawing is definitely an area you want accuracy. \u003cbr\u003e\u003cbr\u003e \u003cem\u003e\u003cu\u003eEfficiency with the Cam Lever Tension\u003c\/u\u003e\u003c\/em\u003e\u003cbr\u003e The saw frame is not adjustable. It is designed for use with standard length jewelers' sawblades. This eliminates and adjusting or \"\"fiddling\"\" with loose frames when you are trying to fit a blade. This saw frame features the amazing Cam Lever. The Cam Lever allows for the quick tensioning of sawblades. You just insert a sawblade and tighten, then use the Tension Screw to \"\"pre-tension\"\" the blade. Then by flipping the Cam Lever over 180deg., the blade gets a locked into its final tension position. Now anytime you need to replace an blade, just release the Cam Lever, change the blade and reset the Cam Lever. You are ready to go. No need to readjust the tension. Saves you tons of time and aggravation. \u003cbr\u003e\u003cbr\u003e \u003cem\u003e\u003cu\u003eBetter Techniques with the Swivel Blade Clamps\u003c\/u\u003e\u003c\/em\u003e\u003cbr\u003e Well, better tools in the right hands will produce better results. This is absolutely a better saw frame. This model saw frame may just better your technique. This Knew Concepts Mark IV saw frame also features patent pending Saw Blade Clamps. Saw Blade Clamps allow you to swivel the sawblade 360deg to the right or left of center with clock stops every 45deg. Now you can cut indents and long strip designs more freely and easily.  \u003cbr\u003e\u003cbr\u003e\u003ccenter\u003e\n\u003cstrong\u003e The Advantages of a Swivel Blade Clamp\u003c\/strong\u003e\u003cbr\u003e\u003ciframe src=\"https:\/\/www.youtube-nocookie.com\/embed\/NxQ8Gw8Cmao?rel=0\" width=\"100%\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\n\u003c\/center\u003e\n\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eSAW FRAME FEATURES:\u003c\/strong\u003e\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003e3\"\" cutting depth\u003c\/li\u003e\n\u003cli\u003eOverall frame dimensions: 14-1\/2\" x 5-1\/2\"\u003c\/li\u003e\n\u003cli\u003eHeat treated, light weight, rigid aluminum frame\u003c\/li\u003e\n\u003cli\u003eSignature Knew Concepts red color\u003c\/li\u003e\n\u003cli\u003eCam Lever for Super Fast Tensioning\u003c\/li\u003e\n\u003cli\u003eSaw Blade Clamps for control over the swivel of the sawblade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"KNEW CONCEPTS","offers":[{"title":"Default Title","offer_id":51106783789341,"sku":"SW4073","price":119.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/1044\/0733\/files\/sw4073-l.jpg?v=1774987175"},{"product_id":"sw4075","title":"SW4075 = Knew Concepts Mk IV 5'' Saw with Tension Lever \u0026 Swivel","description":"\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"75%\"\u003e\n\u003cspan style=\"font-family: arial; font-size: small;\"\u003e\u003cspan style=\"font-family: arial; font-size: small;\"\u003e \u003cstrong\u003eKNEW CONCEPTS 5\" MARK IV HEAVY DUTY HAND SAWS with CAM LEVER TENSION and SWIVEL BLADE CLAMPS\u003c\/strong\u003e\u003cbr\u003e Knew Concepts saw frames were designed to address the needs of the hand-sawing jeweler and craftpersons.\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003eReduce sawblade breakage\u003c\/li\u003e\n\u003cli\u003eReduce fatigue\u003c\/li\u003e\n\u003cli\u003eIncrease efficiency\u003c\/li\u003e\n\u003cli\u003eBetter techniques\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cspan style=\"font-family: arial; font-size: small;\"\u003e\u003cbr\u003e\u003cbr\u003e \u003c\/span\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\"\u003e\n\u003cspan style=\"font-family: arial; font-size: small;\"\u003e\u003cspan style=\"font-family: arial; font-size: small;\"\u003e \u003cstrong\u003eSo, What  do these New Mark IV Saw Frames Offer?\u003c\/strong\u003e\u003cbr\u003e \u003cbr\u003e \u003cem\u003e\u003cu\u003eThe Frame\u003c\/u\u003e\u003c\/em\u003e\u003cbr\u003e Saw frame flex is a big culprit in breaking sawblades. The Mark IV frames are designed to pull 50‚¬Å“60 pounds of tension on their blades, which makes them much stronger and the blades vibrate less than than the Mark 3 saws. They are are also thicker and slightly heavier, closer to the weight of a traditional saw, but still lighter. The saw is powder-coated red, with a laser engraved logo and is extremely scratch and damage resistant.  That rigidity also translates into better control over your sawblade.\u003cbr\u003e\u003cbr\u003e \u003cem\u003e\u003cu\u003eColor\u003c\/u\u003e\u003c\/em\u003e\u003cbr\u003e Red saw frame. Why red? A recent study published in \u003cem\u003eScience\u003c\/em\u003e magazine suggests color has an effect on cognitive tasks. Data indicates the color red promotes better accuracy when performing tasks. Sawing is definitely an area you want accuracy. \u003cbr\u003e\u003cbr\u003e \u003cem\u003e\u003cu\u003eEfficiency with the Cam Lever Tension\u003c\/u\u003e\u003c\/em\u003e\u003cbr\u003e The saw frame is not adjustable. It is designed for use with standard length jewelers' sawblades. This eliminates and adjusting or \"fiddling\" with loose frames when you are trying to fit a blade. This saw frame features the amazing Cam Lever. The Cam Lever allows for the quick tensioning of sawblades. You just insert a sawblade and tighten, then use the Tension Screw to \"pre-tension\" the blade. Then by flipping the Cam Lever over 180deg., the blade gets a locked into its final tension position. Now anytime you need to replace an blade, just release the Cam Lever, change the blade and reset the Cam Lever. You are ready to go. No need to readjust the tension. Saves you tons of time and aggravation. \u003cbr\u003e\u003cbr\u003e \u003cem\u003e\u003cu\u003eBetter Techniques with the Swivel Blade Clamps\u003c\/u\u003e\u003c\/em\u003e\u003cbr\u003e Well, better tools in the right hands will produce better results. This is absolutely a better saw frame. This model saw frame may just better your technique. This Knew Concepts Mark IV saw frame also features patent pending Saw Blade Clamps. Saw Blade Clamps allow you to swivel the sawblade 360deg to the right or left of center with clock stops every 45deg. Now you can cut indents and long strip designs more freely and easily.  \u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\u003ccenter\u003e\n\u003cstrong\u003e\u003cspan style=\"color: #cc6600; font-family: Arial; font-size: small;\"\u003e The Advantages of a Swivel Blade Clamp\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ciframe src=\"https:\/\/www.youtube-nocookie.com\/embed\/NxQ8Gw8Cmao?rel=0\" width=\"100%\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\n\u003c\/center\u003e\n\u003cspan style=\"font-family: arial; font-size: small;\"\u003e\u003cspan style=\"font-family: arial; font-size: small;\"\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eSAW FRAME FEATURES:\u003c\/strong\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003e5\" cutting depth\u003c\/li\u003e\n\u003cli\u003eOverall frame dimensions: 14-1\/2\" x 7-1\/8\"\u003c\/li\u003e\n\u003cli\u003eHeat treated, light weight, rigid aluminum frame\u003c\/li\u003e\n\u003cli\u003eSignature Knew Concepts red color\u003c\/li\u003e\n\u003cli\u003eCam Lever for Super Fast Tensioning\u003c\/li\u003e\n\u003cli\u003eSaw Blade Clamps for control over the swivel of the sawblade\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"KNEW CONCEPTS","offers":[{"title":"Default Title","offer_id":51106783822109,"sku":"SW4075","price":129.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/1044\/0733\/files\/sw4075-l.jpg?v=1774987176"}],"url":"https:\/\/fdjtool.com\/collections\/knew-concepts.oembed","provider":"FDJtool","version":"1.0","type":"link"}