{"title":"Foredom Workbench System","description":"","products":[{"product_id":"ho8013","title":"HO8013 = Dual Motor Hanger with Mounting Base by Foredom","description":"\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"75%\"\u003e\n\u003cstrong\u003eFOREDOM WORK BENCH SYSTEM\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eDouble Motor Hanger with Base Mount\u003c\/strong\u003e\u003cbr\u003eUse the MAMH-13 Double Motor Hanger by itself or as the heart of your own Work Bench System!\u003cbr\u003e\u003cbr\u003eAs a Double Motor Hanger, it's outstanding. The mounting base screw directly to your bench top. The main support rod is held in place by a large set screw. The angled top is also held in place by set screw, but you have the advantage of adjusting the overall height of the hanger so that you can hang the motors between 33\" and 38\" above the work surface as measured from the top of the motor.\u003cbr\u003e\u003cbr\u003eTwo spring-hooks let you hang 1 or 2 motors right at hand.\u003cbr\u003e\u003cbr\u003eThe Double Motor Hanger includes:\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eThe round mounting plate\u003c\/li\u003e\n\u003cli\u003e3 mounting screws\u003c\/li\u003e\n\u003cli\u003eThe 25-3\/4\" long upright support rod\u003c\/li\u003e\n\u003cli\u003eThe angled extension rod\u003c\/li\u003e\n\u003cli\u003e2 spring safety clips for the motors\u003c\/li\u003e\n\u003cli\u003eAn Allen wrench\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eForedom Work Bench System Accessories\u003c\/strong\u003e\u003cbr\u003eBy ordering accessory components (not included), you can transform this Motor Hanger into an incredibly organized and efficient tool holder.  You can order:\u003cbr\u003e\u003cbr\u003e\n\u003ctable style=\"width: 695px;\" border=\"0\" width=\"622\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 323px;\" valign=\"top\" width=\"200\"\u003e\n\u003cstrong\u003eLED Light Bar\u003c\/strong\u003e\u003cbr\u003e A 31-1\/2\" long pivoting LED light bar with a shade to illuminate your work surface.\u003c\/td\u003e\n\u003ctd style=\"width: 14px;\" width=\"10\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 358px;\" valign=\"top\" width=\"200\"\u003e\n\u003cstrong\u003eMagnetic Arm\u003c\/strong\u003e\u003cbr\u003e A 2 sided, felt covered arm to securely hold small metal tools securely.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 323px;\" valign=\"top\" width=\"200\"\u003e\n\u003cstrong\u003eBur Holder Arm\u003c\/strong\u003e\u003cbr\u003e A 2 tiered metal arm that stores and organizes 95 mounted buffs and brushes with 3\/32\" or 1\/8\" shanks.\u003c\/td\u003e\n\u003ctd style=\"width: 14px;\" width=\"10\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 358px;\" valign=\"top\" width=\"200\"\u003e\n\u003cstrong\u003eTray Arm\u003c\/strong\u003e\u003cbr\u003e A This metal arm is a tray with 3 partitions for holding loose items.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 323px;\" valign=\"top\" width=\"200\"\u003e\n\u003cstrong\u003eJar Holder Arm\u003c\/strong\u003e\u003cbr\u003e A metal arm with 6 plastic screw to jars for storing small parts.\u003c\/td\u003e\n\u003ctd style=\"width: 14px;\" width=\"10\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 358px;\" valign=\"top\" width=\"200\"\u003e\n\u003cstrong\u003eMulti Handpiece Arm\u003c\/strong\u003e\u003cbr\u003e A metal arm with 6 upright pegs for storing your non-duplex spring handpieces.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 323px;\" valign=\"top\" width=\"200\"\u003e\n\u003cstrong\u003ePeg Arm\u003c\/strong\u003e\u003cbr\u003e An angled metal arm with 10 removable pegs for hanging items on.  Can hold pliers, saws, etc.\u003c\/td\u003e\n\u003ctd style=\"width: 14px;\" width=\"10\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 358px;\" valign=\"top\" width=\"200\"\u003e\n\u003cstrong\u003eDual Handpiece Rest\u003c\/strong\u003e\u003cbr\u003e Slides onto the flexshaft stand to secure your handpiece when not in use.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\u003cbr\u003eChoose the accessory or accessories that will best organize your work bench and build a Work Bench System just for you!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"100%\"\u003e\n\u003ctable id=\"table3\" border=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"50%\"\u003e\u003ccenter\u003e\n\u003cstrong\u003e\u003cspan style=\"color: #cc6600; font-family: Arial; font-size: small;\"\u003eThe Foredom Work Bench System\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ciframe src=\"\/\/www.youtube-nocookie.com\/embed\/7eR3KEz63BE?rel=0\" width=\"100%\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\n\u003c\/center\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"FOREDOM","offers":[{"title":"Default Title","offer_id":51106340897053,"sku":"HO8013","price":69.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/1044\/0733\/files\/HO8013.jpg?v=1782443791"},{"product_id":"ho8013-01","title":"HO8013-01 = LED Light Bar with Shade by Foredom (31-1\/2'' long)","description":"\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"75%\"\u003e\n\u003cstrong\u003eFOREDOM WORK BENCH SYSTEM\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLED Light Bar with Shade\u003c\/strong\u003e\u003cbr\u003eThis 31-1\/2\" long LED Light Bar is a bright spot in the Foredom Work Bench System.  It is designed to illuminate an entire work surface.  The unique design of the light turns it \"ON\" when the lamp is folded down over the bench and \"OFF\" when it is folded up 90deg out of the way.\u003cbr\u003e\u003cbr\u003eThe LED Light Bar is part of the Foredom Work Bench System.  It is deigned to fit onto the MAMH-13 Double Motor Hanger.  It will also fit onto theMAAM-S Short Support Rod and the MAAM-L Long Support Rod.  These are non-motor hanger rods that allow you to build a Work Bench System without a motor hanger.\u003cbr\u003e\u003cbr\u003eThe LED Light Bar is held in place on the Support Rods by a heavy metal clamp and set screw.  This means you can position the lamp almost any where allow the support rod.  It comes with a power cord and adapter assembly for use with 115 or 230v.\u003cbr\u003e\u003cbr\u003eThe LED Light Bar comes with a shade that is mounted for right hand use, but can be unscrewed and flipped for left hand use.\u003cbr\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eModel MALB-1\u003c\/li\u003e\n\u003cli\u003e \u003c\/li\u003e\n\u003cli\u003e31-1\/2\" long\u003c\/li\u003e\n\u003cli\u003e630 lumens\u003c\/li\u003e\n\u003cli\u003e9 Watts, 24 volts\u003c\/li\u003e\n\u003cli\u003eFor 115 or 230 volt use\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"100%\"\u003e\n\u003ctable id=\"table3\" border=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"50%\"\u003e\u003ccenter\u003e\n\u003cstrong\u003e\u003cspan style=\"color: #cc6600; font-family: Arial; font-size: small;\"\u003eThe Foredom Work Bench System\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ciframe src=\"\/\/www.youtube-nocookie.com\/embed\/7eR3KEz63BE?rel=0\" width=\"100%\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\n\u003c\/center\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"FOREDOM","offers":[{"title":"Default Title","offer_id":51106340929821,"sku":"HO8013-01","price":197.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/1044\/0733\/files\/ho8013-01-l6.jpg?v=1774978707"},{"product_id":"ho8013-02","title":"HO8013-02 = Bur Holder Arm by Foredom (Holds 95 Burs)","description":"\u003ctable style=\"width: 104.688%;\" border=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 100%;\" width=\"75%\"\u003e\n\u003cstrong\u003eFOREDOM WORK BENCH SYSTEM\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBur Holder Arm\u003c\/strong\u003e\u003cbr\u003eStores and organizes up to 95 mounted burs or abrasives with 3\/32\" and 1\/8\" shanks.  \u003cbr\u003e\u003cbr\u003eThe Bur Holder Arm is part of the Foredom Work Bench System.  It is deigned to fit onto the MAMH-13 Double Motor Hanger.  It will also fit onto theMAAM-S Short Support Rod and the MAAM-L Long Support Rod.  These are non-motor hanger rods that allow you to build a Work Bench System without a motor hanger.\u003cbr\u003e\u003cbr\u003eThe Bur Holder Arm is held in place on the Support Rods by a heavy metal clamp and set screw.  This means you can position the arm almost any where allow the support rod.  Once the arm is locked into place, 5 position ratchet hinge allows you to swing the arm 180deg horizontally to keep your accessories within reach or out of the way when not needed.\u003cbr\u003e\u003cbr\u003eAll of the accessory arms of the Foredom Work Bench System are 12\" in length for uniformity and ease of use.\u003cbr\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eModel MAAH-B\u003c\/li\u003e\n\u003cli\u003e12\" long x 2\" wide x 1-1\/4\" high (30 x 5 x 3cm)\u003c\/li\u003e\n\u003cli\u003eTop tier: 57 holes for 3\/32\"\u003c\/li\u003e\n\u003cli\u003eBottom tier: 38 holes for 1\/8\" or 3\/32\"\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 100%;\"\u003e\u003ccenter\u003e\n\u003cstrong\u003e\u003cspan style=\"color: #cc6600; font-family: Arial; font-size: small;\"\u003eThe Foredom Work Bench System\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ciframe src=\"\/\/www.youtube-nocookie.com\/embed\/7eR3KEz63BE?rel=0\" width=\"100%\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\n\u003c\/center\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"FOREDOM","offers":[{"title":"Default Title","offer_id":51106340995357,"sku":"HO8013-02","price":89.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/1044\/0733\/files\/ho8013-02-l_92ae8dcb-057b-47cc-b1fd-26bc1d3bcc82.jpg?v=1774978707"},{"product_id":"ho8013-03","title":"HO8013-03 = Jar Holder Arm with 6 Jars by Foredom (12'' Long)","description":"\u003ctable style=\"width: 105.556%;\" border=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 100%;\" width=\"75%\"\u003e\n\u003cstrong\u003eFOREDOM WORK BENCH SYSTEM\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eJar Holder Arm with 6 Jars\u003c\/strong\u003e\u003cbr\u003eStores and organizes small components, pieces, miscellaneous parts that might otherwise be lost or misplaced.  \u003cbr\u003e\u003cbr\u003eThe Jar Holder Arm is part of the Foredom Work Bench System.  It is deigned to fit onto the MAMH-13 Double Motor Hanger.  It will also fit onto theMAAM-S Short Support Rod and the MAAM-L Long Support Rod.  These are non-motor hanger rods that allow you to build a Work Bench System without a motor hanger.\u003cbr\u003e\u003cbr\u003eThe Jar Holder Arm is held in place on the Support Rods by a heavy metal clamp and set screw.  This means you can position the arm almost any where allow the support rod.  Once the arm is locked into place, 5 position ratchet hinge allows you to swing the arm 180deg horizontally to keep your accessories within reach or out of the way when not needed.\u003cbr\u003e\u003cbr\u003eAll of the accessory arms of the Foredom Work Bench System are 12\" in length for uniformity and ease of use.\u003cbr\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eModel MAAH-J\u003c\/li\u003e\n\u003cli\u003e12\" long x 2\" wide x 2-1\/2\" high (30 x 5 x 6cm)\u003c\/li\u003e\n\u003cli\u003eJars are 1-1\/2\" (3.18cm) in diameter\u003c\/li\u003e\n\u003cli\u003eJars feature screw tops\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 100%;\"\u003e\u003ccenter\u003e\n\u003cstrong\u003e\u003cspan style=\"color: #cc6600; font-family: Arial; font-size: small;\"\u003eThe Foredom Work Bench System\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ciframe src=\"\/\/www.youtube-nocookie.com\/embed\/7eR3KEz63BE?rel=0\" width=\"100%\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\n\u003c\/center\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"FOREDOM","offers":[{"title":"Default Title","offer_id":51106341060893,"sku":"HO8013-03","price":64.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/1044\/0733\/files\/ho8013-03-l.jpg?v=1774978708"},{"product_id":"ho8013-04","title":"HO8013-04 = Peg Arm with 10 Pegs by Foredom (12'' long)","description":"\u003ctable style=\"width: 105.035%;\" border=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 100%;\" width=\"75%\"\u003e\n\u003cstrong\u003eFOREDOM WORK BENCH SYSTEM\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePeg Holder Arm with 10 Pegs\u003c\/strong\u003e\u003cbr\u003eThis arm features 5 angled, stainless steel along each side and a non-scratch felt along the upper surface.  The pegs can securely hold grinding wheels, larger radial discs, and other polishing wheels with at least a 3\/8\" arbor hole.  you could even hang saw frames, handpieces and other tools.  the felt upper edge is ideal for holding pliers and tweezers. \u003cbr\u003e\u003cbr\u003eThe Peg Holder Arm is part of the Foredom Work Bench System.  It is deigned to fit onto the MAMH-13 Double Motor Hanger.  It will also fit onto theMAAM-S Short Support Rod and the MAAM-L Long Support Rod.  These are non-motor hanger rods that allow you to build a Work Bench System without a motor hanger.\u003cbr\u003e\u003cbr\u003eThe Peg Holder Arm is held in place on the Support Rods by a heavy metal clamp and set screw.  This means you can position the arm almost any where allow the support rod.  Once the arm is locked into place, 5 position ratchet hinge allows you to swing the arm 180deg horizontally to keep your accessories within reach or out of the way when not needed.\u003cbr\u003e\u003cbr\u003eAll of the accessory arms of the Foredom Work Bench System are 12\" in length for uniformity and ease of use.\u003cbr\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eModel MAAH-P\u003c\/li\u003e\n\u003cli\u003e12\" long x 4\" wide x 1-1\/2\" high (30 x 10.2 x 3.7cm)\u003c\/li\u003e\n\u003cli\u003ePegs are 1-1\/2\" long x 5\/16\" diameter (3.7cm x 0.8cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 100%;\"\u003e\u003ccenter\u003e\n\u003cstrong\u003e\u003cspan style=\"color: #cc6600; font-family: Arial; font-size: small;\"\u003eThe Foredom Work Bench System\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ciframe src=\"\/\/www.youtube-nocookie.com\/embed\/7eR3KEz63BE?rel=0\" width=\"100%\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\n\u003c\/center\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"FOREDOM","offers":[{"title":"Default Title","offer_id":51106341126429,"sku":"HO8013-04","price":81.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/1044\/0733\/files\/ho8013-04-l.jpg?v=1774978709"},{"product_id":"ho8013-05","title":"HO8013-05 = Magnetic Arm with Felt Covering by Foredom (12'' long)","description":"\u003ctable style=\"width: 103.472%;\" border=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 100%;\" width=\"75%\"\u003e\n\u003cstrong\u003eFOREDOM WORK BENCH SYSTEM\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMagnetic Arm\u003c\/strong\u003e\u003cbr\u003eThis arm is a double sided magnet covered with a non-scratch felt.  The magnet has excellent holding powers for pliers, files, gravers and other steel or iron tools.  Please note that extended use of the Magnetic Arm can magnetize tools. \u003cbr\u003e\u003cbr\u003eThe Magnetic Arm is part of the Foredom Work Bench System.  It is deigned to fit onto the MAMH-13 Double Motor Hanger.  It will also fit onto the MAAM-S Short Support Rod and the MAAM-L Long Support Rod.  These are non-motor hanger rods that allow you to build a Work Bench System without a motor hanger.\u003cbr\u003e\u003cbr\u003eThe Magnetic Arm is held in place on the Support Rods by a heavy metal clamp and set screw.  This means you can position the arm almost any where allow the support rod.  Once the arm is locked into place, 5 position ratchet hinge allows you to swing the arm 180deg horizontally to keep your accessories within reach or out of the way when not needed.\u003cbr\u003e\u003cbr\u003eAll of the accessory arms of the Foredom Work Bench System are 12\" in length for uniformity and ease of use.\u003cbr\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eModel MAAH-M\u003c\/li\u003e\n\u003cli\u003e12\" long x 1\/2\" wide x 1-1\/2\" high (30 x 1.2 x 3.7cm)\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 100%;\"\u003e\u003ccenter\u003e\n\u003cstrong\u003e\u003cspan style=\"color: #cc6600; font-family: Arial; font-size: small;\"\u003eThe Foredom Work Bench System\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ciframe src=\"\/\/www.youtube-nocookie.com\/embed\/7eR3KEz63BE?rel=0\" width=\"100%\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\n\u003c\/center\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"FOREDOM","offers":[{"title":"Default Title","offer_id":51106341159197,"sku":"HO8013-05","price":128.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/1044\/0733\/files\/ho8013-05-l_81b1bc9a-1fb8-41b3-83e7-6c447f287bf8.jpg?v=1774978710"},{"product_id":"ho8013-06","title":"HO8013-06 = Tray Arm with Moveable Partitions by Foredom (12'' long)","description":"\u003ctable style=\"width: 106.076%;\" border=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 100%;\" width=\"75%\"\u003e\n\u003cstrong\u003eFOREDOM WORK BENCH SYSTEM\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eTray Arm\u003c\/strong\u003e\u003cbr\u003eThe Tray Arm offers yet another style of organizing and storing small tools and items that are easily misplaced.  It comes with 3 L-shaped partitions with stick down tape that allow you to divide the tray into segments that best work for you. \u003cbr\u003e\u003cbr\u003eThe Tray Arm is part of the Foredom Work Bench System.  It is deigned to fit onto the MAMH-13 Double Motor Hanger.  It will also fit onto theMAAM-S Short Support Rod and the MAAM-L Long Support Rod.  These are non-motor hanger rods that allow you to build a Work Bench System without a motor hanger.\u003cbr\u003e\u003cbr\u003eThe Tray Arm is held in place on the Support Rods by a heavy metal clamp and set screw.  This means you can position the arm almost any where allow the support rod.  Once the arm is locked into place, 5 position ratchet hinge allows you to swing the arm 180deg horizontally to keep your accessories within reach or out of the way when not needed.\u003cbr\u003e\u003cbr\u003eAll of the accessory arms of the Foredom Work Bench System are 12\" in length for uniformity and ease of use.\u003cbr\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eModel MAAH-T\u003c\/li\u003e\n\u003cli\u003e12\" long x 2-1\/4\" wide x 1-1\/4\" high (30 x 5.8 x 3cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 100%;\"\u003e\u003ccenter\u003e\n\u003cstrong\u003e\u003cspan style=\"color: #cc6600; font-family: Arial; font-size: small;\"\u003eThe Foredom Work Bench System\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ciframe src=\"\/\/www.youtube-nocookie.com\/embed\/7eR3KEz63BE?rel=0\" width=\"100%\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\n\u003c\/center\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"FOREDOM","offers":[{"title":"Default Title","offer_id":51106341224733,"sku":"HO8013-06","price":69.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/1044\/0733\/files\/ho8013-06-l.jpg?v=1774978712"},{"product_id":"ho8013-07","title":"HO8013-07 = Multi Handpiece Arm for 6 Handpieces by Foredom (12'' long)","description":"\u003ctable style=\"width: 105.208%;\" border=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 100%;\" width=\"75%\"\u003e\n\u003cstrong\u003eFOREDOM WORK BENCH SYSTEM\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMulti Handpiece Arm\u003c\/strong\u003e\u003cbr\u003eThe Multi Handpiece Arm is perfect for storing your non-duplex spring handpieces.  There are 6 stepped pegs that are 3\/4\" tall.  Just stand up your Foredom handpiece with the quick disconnect end on a peg. \u003cbr\u003e\u003cbr\u003eThe Multi Handpiece Arm is part of the Foredom Work Bench System.  It is deigned to fit onto the MAMH-13 Double Motor Hanger.  It will also fit onto the MAAM-S Short Support Rod and the MAAM-L Long Support Rod.  These are non-motor hanger rods that allow you to build a Work Bench System without a motor hanger.\u003cbr\u003e\u003cbr\u003eThe Multi Handpiece Arm is held in place on the Support Rods by a heavy metal clamp and set screw.  This means you can position the arm almost any where allow the support rod.  Once the arm is locked into place, 5 position ratchet hinge allows you to swing the arm 180deg horizontally to keep your accessories within reach or out of the way when not needed.\u003cbr\u003e\u003cbr\u003eAll of the accessory arms of the Foredom Work Bench System are 12\" in length for uniformity and ease of use.\u003cbr\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eModel MAAH-H\u003c\/li\u003e\n\u003cli\u003e12\" long x 2-1\/4\" wide x 1-1\/4\" high (30 x 5.8 x 3cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 100%;\"\u003e\u003ccenter\u003e\n\u003cstrong\u003e\u003cspan style=\"color: #cc6600; font-family: Arial; font-size: small;\"\u003eThe Foredom Work Bench System\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ciframe src=\"\/\/www.youtube-nocookie.com\/embed\/7eR3KEz63BE?rel=0\" width=\"100%\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\n\u003c\/center\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"FOREDOM","offers":[{"title":"Default Title","offer_id":51106341290269,"sku":"HO8013-07","price":88.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/1044\/0733\/files\/ho8013-07-l.jpg?v=1774978713"},{"product_id":"ho8013-08","title":"HO8013-08 = Dual Handpiece Rest by Foredom (5-1\/4'' long)","description":"\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"75%\"\u003e\n\u003cb\u003eFOREDOM WORK BENCH SYSTEM\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e\u003cb\u003eDual Handpiece Rest\u003c\/b\u003e\u003cbr\u003eHolds 2 handpieces up and out of the way when not in use. \u003cbr\u003e\u003cbr\u003eThe Dual Handpiece Rest is part of the Foredom Work Bench System. It is deigned to fit onto the MAMH-13 Double Motor Hanger. It will also fit onto the MAAM-S Short Support Rod and the MAAM-L Long Support Rod. These are non-motor hanger rods that allow you to build a Work Bench System without a motor hanger.\u003cbr\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eModel MAAH-HR\u003c\/li\u003e\n\u003cli\u003e5-1\/2\" long x 3-1\/4\" wide x 1-1\/2\" high (13.3 x 8.3 x 3.8cm)\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"100%\"\u003e\n\u003ctable id=\"table3\" border=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"50%\"\u003e\u003ccenter\u003e\n\u003cb\u003e\u003cspan style=\"color: #cc6600; font-family: Arial; font-size: small;\"\u003eThe Foredom Work Bench System\u003c\/span\u003e\u003c\/b\u003e\u003cbr\u003e\u003ciframe src=\"https:\/\/www.youtube-nocookie.com\/embed\/7eR3KEz63BE?rel=0\" width=\"560\" height=\"315\"\u003e\u003c\/iframe\u003e\n\u003c\/center\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"FOREDOM","offers":[{"title":"Default Title","offer_id":51106341355805,"sku":"HO8013-08","price":38.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/1044\/0733\/files\/ho8013-08-l.jpg?v=1774978714"},{"product_id":"ho8013-09","title":"HO8013-09 = Support Rod with Mounting Plate by Foredom (25-1\/4'' tall)","description":"\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"75%\"\u003e\n\u003cstrong\u003eFOREDOM WORK BENCH SYSTEM\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eLong Support Rod\u003c\/strong\u003e\u003cbr\u003eThe Long Support Rod is the perfect heart of your Foredom Work Bench System when you don't have the need for a flexshaft motor hanger.  It is great for users that don't used flexshafts or used other types of motors such as micromotors.  It includes a MABC-3 mounting plate that is screwed to the bench top with the support rod held in place by a set screw. \u003cbr\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eModel MAAM-L\u003c\/li\u003e\n\u003cli\u003e25-3\/4\" tall x 0.0875\" diameter\u003c\/li\u003e\n\u003cli\u003eIncludes MABC-3 mounting plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eForedom Work Bench System Accessories\u003c\/strong\u003e\u003cbr\u003eBy ordering accessory components (not included), you can transform this Motor Hanger into an incredibly organized and efficient tool holder.  You can order:\u003cbr\u003e\u003cbr\u003e\n\u003ctable style=\"width: 701px;\" border=\"0\" width=\"622\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 327px;\" valign=\"top\" width=\"200\"\u003e\n\u003cstrong\u003eLED Light Bar\u003c\/strong\u003e\u003cbr\u003e A 31-1\/2\" long pivoting LED light bar with a shade to illuminate your work surface.\u003c\/td\u003e\n\u003ctd style=\"width: 14px;\" width=\"10\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 360px;\" valign=\"top\" width=\"200\"\u003e\n\u003cstrong\u003eMagnetic Arm\u003c\/strong\u003e\u003cbr\u003e A 2 sided, felt covered arm to securely hold small metal tools securely.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 327px;\" valign=\"top\" width=\"200\"\u003e\n\u003cstrong\u003eBur Holder Arm\u003c\/strong\u003e\u003cbr\u003e A 2 tiered metal arm that stores and organizes 95 mounted buffs and brushes with 3\/32\" or 1\/8\" shanks.\u003c\/td\u003e\n\u003ctd style=\"width: 14px;\" width=\"10\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 360px;\" valign=\"top\" width=\"200\"\u003e\n\u003cstrong\u003eTray Arm\u003c\/strong\u003e\u003cbr\u003e A This metal arm is a tray with 3 partitions for holding loose items.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 327px;\" valign=\"top\" width=\"200\"\u003e\n\u003cstrong\u003eJar Holder Arm\u003c\/strong\u003e\u003cbr\u003e A metal arm with 6 plastic screw to jars for storing small parts.\u003c\/td\u003e\n\u003ctd style=\"width: 14px;\" width=\"10\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 360px;\" valign=\"top\" width=\"200\"\u003e\n\u003cstrong\u003eMulti Handpiece Arm\u003c\/strong\u003e\u003cbr\u003e A metal arm with 6 upright pegs for storing your non-duplex spring handpieces.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 327px;\" valign=\"top\" width=\"200\"\u003e\n\u003cstrong\u003ePeg Arm\u003c\/strong\u003e\u003cbr\u003e An angled metal arm with 10 removable pegs for hanging items on.  Can hold pliers, saws, etc.\u003c\/td\u003e\n\u003ctd style=\"width: 14px;\" width=\"10\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 360px;\" valign=\"top\" width=\"200\"\u003e\n\u003cstrong\u003eDual Handpiece Rest\u003c\/strong\u003e\u003cbr\u003e Slides onto the flexshaft stand to secure your handpiece when not in use.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\u003cbr\u003eChoose the accessory or accessories that will best organize your work bench and build a Work Bench System just for you!\u003cbr\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"100%\"\u003e\n\u003ctable id=\"table3\" border=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"50%\"\u003e\u003ccenter\u003e\n\u003cstrong\u003e\u003cspan style=\"color: #cc6600; font-family: Arial; font-size: small;\"\u003eThe Foredom Work Bench System\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ciframe src=\"\/\/www.youtube-nocookie.com\/embed\/7eR3KEz63BE?rel=0\" width=\"100%\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\n\u003c\/center\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"FOREDOM","offers":[{"title":"Default Title","offer_id":51106341421341,"sku":"HO8013-09","price":49.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/1044\/0733\/files\/ho8013-09-l.jpg?v=1774978716"},{"product_id":"ho8013-10","title":"HO8013-10 = Support Rod with Mounting Plate by Foredom (17-3\/4'' tall)","description":"\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"75%\"\u003e\n\u003cstrong\u003eFOREDOM WORK BENCH SYSTEM\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eShort Support Rod\u003c\/strong\u003e\u003cbr\u003eThe Long Support Rod is the perfect heart of your Foredom Work Bench System when you don't have the need for a flexshaft motor hanger.  It is great for users that don't used flexshafts or used other types of motors such as micromotors.  It includes a MABC-3 mounting plate that is screwed to the bench top with the support rod held in place by a set screw. \u003cbr\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eModel MAAM-S\u003c\/li\u003e\n\u003cli\u003e17-3\/4\" tall x 0.0875\" diameter\u003c\/li\u003e\n\u003cli\u003eIncludes MABC-3 mounting plate\u003c\/li\u003e\n\u003cli\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eForedom Work Bench System Accessories\u003c\/strong\u003e\u003cbr\u003eBy ordering accessory components (not included), you can transform this Motor Hanger into an incredibly organized and efficient tool holder.  You can order:\u003cbr\u003e\u003cbr\u003e\n\u003ctable style=\"width: 699px;\" border=\"0\" width=\"622\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 320px;\" valign=\"top\" width=\"200\"\u003e\n\u003cstrong\u003eLED Light Bar\u003c\/strong\u003e\u003cbr\u003e A 31-1\/2\" long pivoting LED light bar with a shade to illuminate your work surface.\u003c\/td\u003e\n\u003ctd style=\"width: 25px;\" width=\"10\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 354px;\" valign=\"top\" width=\"200\"\u003e\n\u003cstrong\u003eMagnetic Arm\u003c\/strong\u003e\u003cbr\u003e A 2 sided, felt covered arm to securely hold small metal tools securely.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 320px;\" valign=\"top\" width=\"200\"\u003e\n\u003cstrong\u003eBur Holder Arm\u003c\/strong\u003e\u003cbr\u003e A 2 tiered metal arm that stores and organizes 95 mounted buffs and brushes with 3\/32\" or 1\/8\" shanks.\u003c\/td\u003e\n\u003ctd style=\"width: 25px;\" width=\"10\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 354px;\" valign=\"top\" width=\"200\"\u003e\n\u003cstrong\u003eTray Arm\u003c\/strong\u003e\u003cbr\u003e A This metal arm is a tray with 3 partitions for holding loose items.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 320px;\" valign=\"top\" width=\"200\"\u003e\n\u003cstrong\u003eJar Holder Arm\u003c\/strong\u003e\u003cbr\u003e A metal arm with 6 plastic screw to jars for storing small parts.\u003c\/td\u003e\n\u003ctd style=\"width: 25px;\" width=\"10\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 354px;\" valign=\"top\" width=\"200\"\u003e\n\u003cstrong\u003eMulti Handpiece Arm\u003c\/strong\u003e\u003cbr\u003e A metal arm with 6 upright pegs for storing your non-duplex spring handpieces.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 320px;\" valign=\"top\" width=\"200\"\u003e\n\u003cstrong\u003ePeg Arm\u003c\/strong\u003e\u003cbr\u003e An angled metal arm with 10 removable pegs for hanging items on.  Can hold pliers, saws, etc.\u003c\/td\u003e\n\u003ctd style=\"width: 25px;\" width=\"10\"\u003e \u003c\/td\u003e\n\u003ctd style=\"width: 354px;\" valign=\"top\" width=\"200\"\u003e\n\u003cstrong\u003eDual Handpiece Rest\u003c\/strong\u003e\u003cbr\u003e Slides onto the flexshaft stand to secure your handpiece when not in use.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\u003cbr\u003eChoose the accessory or accessories that will best organize your work bench and build a Work Bench System just for you!\u003cbr\u003e \u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd valign=\"top\" width=\"100%\"\u003e\n\u003ctable id=\"table3\" border=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"50%\"\u003e\u003ccenter\u003e\n\u003cstrong\u003e\u003cspan style=\"color: #cc6600; font-family: Arial; font-size: small;\"\u003eThe Foredom Work Bench System\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ciframe src=\"\/\/www.youtube-nocookie.com\/embed\/7eR3KEz63BE?rel=0\" width=\"100%\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\n\u003c\/center\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"FOREDOM","offers":[{"title":"Default Title","offer_id":51106341486877,"sku":"HO8013-10","price":46.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/1044\/0733\/files\/ho8013-10-l.jpg?v=1774978717"},{"product_id":"ho8013-11","title":"HO8013-11 = Shelf Arm by Foredom Measures 10-1\/4'' x 8-3\/4''","description":"\u003ctable style=\"width: 96.7334%; height: 876px;\" border=\"0\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 100%;\" width=\"75%\"\u003e\n\u003cstrong\u003eFOREDOM WORK BENCH SYSTEM\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eShelf Arm\u003c\/strong\u003e\u003cbr\u003eThe Shelf Arm is perfect for storing often used but space \"eating\" items such as micromotors, wax pens and such.  The shelf measures10-1\/4\" x 8-3\/4\" thus providing a huge foot print for holding a variety of tools. \u003cbr\u003e\u003cbr\u003eThe Shelf Arm is part of the Foredom Work Bench System.  It is deigned to fit onto the MAMH-13 Double Motor Hanger.  It will also fit onto the MAAM-S Short Support Rod and the MAAM-L Long Support Rod.  These are non-motor hanger rods that allow you to build a Work Bench System without a motor hanger.\u003cbr\u003e\u003cbr\u003eThe Shelf Arm is held in place on the Support Rods by a heavy metal clamp and set screw.  This means you can position the arm almost any where allow the support rod.  Once the arm is locked into place, 5 position ratchet hinge allows you to swing the arm 180deg horizontally to keep your accessories within reach or out of the way when not needed.\u003cbr\u003e\u003cbr\u003eAll of the accessory arms of the Foredom Work Bench System are within 12\" in length for uniformity and ease of use.\u003cbr\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\n\u003cul\u003e\n\u003cli\u003eModel MAAH-s\u003c\/li\u003e\n\u003cli\u003e10-1\/4\" long x 8-3\/4\" wide x 1\/4\" high (26 x 22 x 0.6cm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"width: 100%;\"\u003e\u003ccenter\u003e\n\u003cstrong\u003e\u003cspan style=\"color: #cc6600; font-family: Arial; font-size: small;\"\u003eThe Foredom Work Bench System\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003ciframe src=\"\/\/www.youtube-nocookie.com\/embed\/7eR3KEz63BE?rel=0\" width=\"100%\" height=\"315\" frameborder=\"0\" allowfullscreen=\"allowfullscreen\"\u003e\u003c\/iframe\u003e\n\u003c\/center\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"FOREDOM","offers":[{"title":"Default Title","offer_id":51106341552413,"sku":"HO8013-11","price":81.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0977\/1044\/0733\/files\/ho8013-11-l_f993188d-729a-469e-af56-0350076c785f.jpg?v=1774978719"}],"url":"https:\/\/fdjtool.com\/collections\/foredom-workbench-system.oembed","provider":"FDJtool","version":"1.0","type":"link"}